Fire suppression wet chemical:
Fire suppression wet chemical contains ABF-wet chemical as fire suppression agent. Its commercial name is ‘Mobiak Das’. It is matchless in its efficiency and reliability. It is also certified.
Fire suppression wet chemical is best suited for kitchen fires, specially the industrial and hotel kitchens. There is an linear heat detection cable, which activates at 130°, 180° and 251° centigrade. This cable is connected with a control panel. The control panel automatically operates the whole system.
The detection cable senses the fire and give signal to the control panel. The control panel provides both audio and video alarm for alerting the people. There is a built-in siren in the control panel, which rings and produce audio alarm. The pre-configured time delay can be set between 0 to 80 seconds.
After this time the control panel sends signals to the fire extinguisher valve’s fuse. As a result the fire extinguishing agent expels and from a network of pipes and nozzles.more
Manually there are two electrical ways for the activation of the system:
1- With the help of built-in extinguish button of control panel.
2- With the help of remote controlled call point. Install the call point at the nearest point of kitchen.
The mechanical ways of starting a manual wet chemical system are:
1- With the help of a metal wire which works on the pull-handle mechanism.
2- With the help fire extinguisher valve’s rod.
1- CE-EN3 Approved. 2- Local Application Fire Extinguishers with Certified Valve of Automatic & Manual Operation.
3- Vessels with Internal Plastic coating of 6Lt, 9Lt, 11-16Lt, 17-20Lt, and 21-35Lt Extinguishing Agent Capacity.
4- Stainless Steel Vessels of 10Lt and 11-20Lt Extinguishing Agent Capacity.
5-Heavy-duty Extinguisher brackets.
6-Certified Detonator used for the Automatic Activation of the system.
7- Stainless Steel Flexible Hose for connecting the Extinguisher Valve Output to the pipe network.
8- Linear Heat Detection Cable of Activation. 9-Temperatures 138°C, 180°C or 251°C.
10- Porcelain Splice Connectors for connecting Detection Cables of different Activation Temperatures.
11- Stainless Steel Straps used for Linear Heat Detection Cable support.
12- Fire Tape for Linear Heat Detection Cable connections insulation
Remote Pull-Handle Mechanism.
13- 2.2KΩ Resistor for monitoring the Proper Operation of the Detection Line.
14- Remote Control Extinguish Button.
15- ½” Male Thread. 16- Stainless Steel Discharge Nozzles of Different Flow rates with inflammable Silicon Caps.
17- Zone Control Panel with: – Battery – Siren -Beacon
Detonator Time-delay set by the factory to 40 seconds (it can be set from 0-80sec).
18- Factory connected Extinguish Cancel Button with 2m cable
Factory connected White Cable for Power Supply with Suko Plug (2m length).
19- Factory connected White Cable with Plastic Splice Connector of 2 contacts for connecting the Detonator of the System (2m length).
20- Factory connected Orange Cable with Plastic Splice Connector of 2 contacts for connecting the Linear Heat Detection Cable (2m length) Output Relay for Electrical Power Shut down of Selected Kitchen Appliances and Air Duct Fans as well as for Shut down of fuel (gas).
21- Gas / Propane Electro-mechanical switching valve (is not included
Fire Safety shop:
You should visit our store for purchasing imported quality fire fighting equipment. If you are looking for the best shop near me for purchasing a fire suppression wet chemical system, at reasonable prices in Pakistan, must visit the Fire Safety Shop. contact us